VX-800 family photo shows keypad and non-keypad versions.
Vertex Standard · Hand Held radios
Vertex Standard VX-800 A 400–430 MHz UHF handheld radio
Handheld radio · UHF · analogue. Transmit power: 5 / 2.5 / 1 / 0.25 W selectable (specification table).
Reference specifications for identifying existing equipment. Contact us for sourcing.
Reference equipment
Request sourcingSpecifications
- Equipment type
- Handheld radio
- Radio band
- UHF
- Transmit frequency
- 400–430 MHz
- Receive frequency
- 400–430 MHz (UHF, this hardware variant)
- Transmit power
- 5 / 2.5 / 1 / 0.25 W selectable (specification table)
- Operating modes
- Analogue
- Modulation
- Analogue direct FM: 16K0F3E / 11K0F3E
- Channel spacing
- 12.5 / 25 kHz, UHF version
- Channels / memories
- 200 channels in up to 10 memory groups
- Network operation
- Analogue conventional; optional VTP-50 VX-Trunk module
- Signalling
- CTCSS/DCS encode/decode; DTMF ANI; optional F2D-8 2-tone or F5D-14 5-tone signalling unit
- Encryption / privacy
- Optional FVP-25 encryption/DTMF paging unit; installed module/settings must be checked
- Keypad
- —
- Display
- —
- Battery
- FNB-V62LI 1600 mAh Li-ion or FNB-V57 1100 mAh Ni-Cd; FBA-25 six-AA alkaline case optional
- Water / dust protection
- Weatherproof case and sealed microphone connection; applicable MIL-STD-810 C/D/E tests listed; no IP rating stated
- Dimensions
- 58 × 110 × 28.9 mm (W × H × D)
- Weight
- 300 g with FNB-V62LI, antenna and belt clip
- Compatible accessories
- Listed packs use VAC-800/NC-77 or VAC-6800 depending on chemistry/charger configuration; MH-50A7A and VH-110/120/130 listed. CE31, CT-70 programming and CT-72 cloning cables.
- Supplied items
- —
Original Vertex Standard manufacturer brochure retained by a distributor; specifications apply to the listed band-split and accessory configuration.
The standard radio is separate from the optional intrinsically safe version described in the document. That option does not establish ATEX certification for this record.
Listed option boards and privacy features are model capabilities. Installed options, keys and network settings must be checked before claiming interoperability.
The specifications table lists 0.25 W as the lowest selectable power; one paragraph instead says 0.5 W. Confirm the actual low-power setting.
Source documents
Compatibility
Matching a band or model family does not confirm that radios will work together. Network frequencies, modes, channel settings and required features must also match.
Help me chooseRead the radio guides